Here is the KAZZ Engineering E36 Rear Subframe Reinforcement Kit!
Install these, worry less! This product is an absolute must for any non compact E36, especially those used for spirited driving.
The plates included are designed to be welded to the subframe mounting positions and will rectify the risk of the chassis cracking.
What is included?
x4 subframe mounting reinforcement plates
x2 rear strut tower reinforcement plates
About the material…
These plates are profile cut by our extended professional team in Brisbane, Australia – from 3mm steel. We recommend having a competent fabricator to weld these plates to the mounting position of your subframe.
What’s the point…
The rear subframe mounting area on the E36 chassis is susceptible to cracking. Although the issue is inherent in poor design (using thin metal as mounting face); this issue is usually due to the standard rubber bushings being worn out and consequently allowing continuous subframe movement. This movement soon leads to fatigue cracking.
It is important to acknowledge that this unfortunate act is accelerated if you’re racing/drifting/rallying and should therefore be a must have preventative maintenance item.
Install tips…
1) We strongly recommend all products are installed by a qualified mechanic
2) Recommended to be used with our KAZZENG polyurethane rear subframe bushings (+$350).
3) You can use a spare wheel bolt to hold the plates in position while the mounting studs are removed.
4) Completely clean the mounting area with a grinder (abrasive flappy wheel is recommended) before welding the plates in position.
5) For your safety, removing the fuel tank is recommended.
6) Rear shock tower plates are installed above your rear shocks but underneath the body.
Reviews
There are no reviews yet.